How long does it take to maintain the air cushion membrane machine during operation? Why does the bubble film machine need daily maintenance? In the long-term use of the bubble film machine, reasonable maintenance must be done, so as to effectively build the failure rate. So how to maintain the bubble film machine? Let's have a look together!
During the long-term use of the bubble film machine, reasonable maintenance must be done, so as to effectively reduce the occurrence of faults.
First When feeding the hopper, it must be kept clean and prevent metal sundries, sand and small tools from entering the feeding port to prevent damage to the barrel and screw. If abnormal noise is found during operation, it should be stopped immediately for treatment.
Second, check each system before each startup, and pay attention to the lubrication of each lubricating part at ordinary times.
Third Regular maintenance: thoroughly clean the die every three months, replace the lubricating grease for various bearings every three months, replace the lubricating oil for the reducer every half a year, and overhaul the whole equipment every two years.
Fourth If the screw is taken out of the barrel for some reason, it shall be properly handled to prevent deformation. If it is not installed in the barrel for a long time, the screw must be hung vertically to prevent damage, bending and deformation. The surface of the barrel and the screw shall be coated with anti rust oil for protection.
