The indispensable mechanical equipment in the bubble film production process is the bubble film machine. Bubble film is actually a kind of film with bubble interlayer in the middle of the film. If you can't control the bubble film machine well, it is likely that your product quality and output are not so ideal under the limited time and material constraints; On the contrary, if you control the bubble film machine well, under the limited time and material constraints, your product quality is not only high-quality, but also the product output is very full. Then how to standardize the operation of our bubble film machine is briefly introduced below.
1. Check that the temperature self-control is in good condition and the heating appliances are in good condition. Pay attention to timely adjusting the heating temperature of each point within the index range.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the uniformity of the film thickness, and the bending diameter meets the standard.
4. Check the pressure of the air storage cylinder, which should not be too high, but there should be standby pressure.
5. Check and control the proportion of raw materials and mix them evenly.
6. Check whether there are impurities in the raw materials. In particular, check whether iron is mixed with magnets in time.
7. Check the lubrication of the lubricating oil of the reduction gearbox and the air compressor cylinder.
8. Regularly check the temperature rise of each operating motor and the transmission of the bubble film machine.
