The operation and maintenance requirements of the bubble film machine are as follows:
Operation requirements
Equipment preparation:
Ensure that the bubble film machine is in normal working condition, without faults and damage.
Check whether the power cord, air supply line and other connections are firm.
Check the quality and quantity of the raw materials of the bubble film to ensure that they meet the requirements.
Place the raw materials in the designated location for easy operation and feeding.
Prepare necessary tools, such as cutting knives, rulers, etc., for handling bubble film.
Prepare auxiliary equipment, such as weighers, balers, etc., for subsequent work.
Operation steps:
Press the power switch to start the bubble film machine.
Wait for a while until the equipment is fully started and enters the working state.
Adjust the parameters of the bubble film machine, such as speed, temperature, etc., as needed, and ensure that the parameters are adjusted reasonably to obtain the required bubble film quality and size.
Put the raw materials of the bubble film into the feeding port of the equipment to ensure that the raw materials are fed smoothly without jamming or blocking.
Press the start button to start the production of the bubble film.
Monitor the operation of the equipment to ensure the smooth progress of the production process.
When the bubble film is produced, collect and process it in time.
Use tools such as cutting knives and rulers to cut and process the bubble film according to the required size.
Check the produced bubble film to ensure that the quality meets the requirements.
Use equipment such as weighing machines to weigh and package the bubble film.
After production is completed, press the stop button to turn off the bubble film machine.
Disconnect the power supply and gas source.
Safe operation:
During operation, wear appropriate personal protective equipment, such as gloves, safety shoes, etc.
Operate in strict accordance with the operating procedures and do not change equipment parameters or operating steps without authorization.
Pay attention to the safety of the equipment and handle faults and abnormal conditions in time.
Pay attention to the safe use of the power cord to avoid electric shock accidents.
It is forbidden to use open flames or flammable items around the bubble film machine to prevent fire.
Maintenance requirements
Daily maintenance:
Before each startup, check whether the power supply is normal, and check whether the rotation direction of the spiral and other components is correct after starting the equipment.
Lubricate each part regularly to maintain its good lubrication performance.
Check the lubrication of the air compressor cylinder lubricating oil to ensure that the reducer is in normal position.
Professional maintenance:
Arrange professional personnel to operate to avoid idling of the equipment to avoid scratches between the screw and the barrel.
When there is material in the barrel, before restarting the machine, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and the temperature must be kept for a period of time before starting. It is strictly forbidden to start before the temperature reaches the requirements to avoid damage to parts.
Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.
Regular maintenance:
In addition to maintenance during daily use, the equipment should be regularly overhauled and maintained every year, including thorough cleaning of the die head, replacement of bearing grease, replacement of reducer lubricating oil, etc., to extend the service life of the equipment.
Precautions for feeding:
When feeding, it is necessary to keep the raw materials clean to prevent metal debris from entering the material port and damaging the barrel and screw.
If abnormal sounds are found during the feeding process, it is necessary to stop the machine in time to avoid damage to the equipment.
