Mini Film Blowing Machine
Suitable material: HDPE/ LDPE/ LLDPE/ EVA/ Caco3
Film layer: 1 layer
Screw L/D ratio: 30:1/ 32:1
Machine Introduction
The Mini film blowing machine is a very popular model for T-shirt bag and flat bag manufacturers. Commonly used screw sizes are Ø45mm, Ø50 and Ø55mm, covering bag widths from 100-600mm. The screw design is suitable for both HDPE and LDPE materials.
Advantage
● No additional installation is required, only wiring is required for normal production.
● Easy to use
● Save space, usually the length and width of the machine are 2.3 meters
● The transportation cost is lower, and one 40 container can loading 5 Sets
Technical parameters
Model | XY-M45 | XY- M50 |
Suitable material | HDPE / LDPE / LLDPE / EVA/ Caco3 | |
Film width | 100-400mm | 100-500mm |
Roller width | 500mm | 600mm |
Film thickness | 0.01-0.15mm | 0.01-0.15mm |
Max.output | 15-30kg/h | 15-35kg/h |
Screw diameter | Φ45 | Φ50 |
Screw L/D | 30:1 | 30:1 |
Driving motor | 11kw | 15kw |
Gearbox | 133 | 146 |
Die size | Φ50 | Φ60 |
Weight | 2000kg | 2500kg |
※Correct specifications depend on the actual model. All specifications are subject to change without prior notice.
Possible Product
T-shirt bag
Beverage bag
Flat bag on rolling
T-shirt bag on rolling
Bottom sealing bag
Disposable PE gloves
Machine photo
Hot Tags: mini film blowing machine, China mini film blowing machine manufacturers, suppliers, factory, plastic aglo machine, roll slitter, pneumatic spiral punching machine, portia recycle machine, nylon cutting machine, agricultural film blowing machine
You Might Also Like
Send Inquiry